Hashtag

The Property Pack

a 10-point plan to fix the residential building industry

  • Written by Geoff Hanmer, Adjunct Lecturer in Architecture, Univeristy of NSW, UNSW

The failure of the Opal Tower building in Sydney has highlighted the poor quality of speculatively built multi-unit housing in Australia. The tower’s 392 apartments were evacuated on Christmas Eve when residents heard loud cracks and defects were found. So far, the only reaction from government has been a knee-jerk promise to crack down on shonky building certifiers (that’s you Matt Kean, minister for innovation and better regulation in New South Wales). Unfortunately, there is no evidence this will make any difference.

Read more: There are lessons to be drawn from the cracks that appeared in Sydney's Opal Tower, but they extend beyond building certification

a 10-point plan to fix the residential building industry An Opal Tower apartment with ceiling and flooring removed and propping equipment installed. AAP/Supplied

Planning policies embraced by the NSW and Victorian governments mean a greater percentage of new housing is being constructed in tall multi-unit developments than ever before, particularly in Sydney and Melbourne.

Between 50% and 80% of multi-unit buildings have defects serious enough to be the subject of strata committee involvement. Possibly close to 100% have significant defects at completion. Most of the problems are waterproofing issues (which may not be evident for years), malfunctioning services or a lack of proper compliance with fire codes and standards.

We can only fix this problem by changing the culture of the residential building industry.

Read more: The big lesson from Opal Tower is that badly built apartments aren't only an issue for residents

We don’t need another royal commission. Governments could implement all of the suggestions below using their existing powers.

1) Increase density by permitting more subdivisions on existing housing blocks rather than building tall buildings.

Two Torrens title townhouses can be built on a normal single-house quarter-acre block. Low-scale buildings will still suffer from defects, but are less problematic to build, inspect and repair than tall buildings and use simpler technology.

2) In the short term, provide occupation certificates to new residential buildings taller than three storeys only if they comply with an enhanced protocol of regulations and oversight.

State government would implement this, with a focus on waterproofing and fire performance.

A suitable code, standards and protocols could be developed in a few weeks. The necessary people to provide independent oversight could be drawn from qualified architects, builders and engineers who are able to pass a probing exam. They would be independent of the design and construction team. The government would fix their fees.

3) Develop a program to enhance the standards for residential building standards in the National Construction Code (NCC).

The current NCC codes for Class 2 buildings (home units) favour innovation and cost reduction over consumer protection. This is the wrong way around for housing. Section F, which covers health and amenity (including waterproofing), is weak and must be strengthened.

4) A voluntary quality scheme to star-rate all apartments, similar to ANCAP (Australasia New Car Assessment Program), might work with industry support.

The minimum standard permissible would comply with the enhanced standards. The NSW Building and Construction Council promoted a scheme in the 1990s but failed due to lack of government support. It was a good idea then, and it is still a good idea now.

5) If the industry won’t support a voluntary scheme, government should introduce a coercive qualified practitioner (QP) scheme.

This would be a permanent version of the short-term scheme. If a building goes bad, the QP could lose the right to practise as a QP as well as being liable to the owners.

6) Revitalise trade training and certification to ensure all trade workers are properly trained and certified.

Many trades on building sites have no training and are not licensed. The requirement to read directions and document work against procedures means everyone on site must be functionally literate. The goal should be to have 30% of people working on site at Certificate 4 level by 2025. 100% of building workers should be literate by 2025. This should be a national requirement, checked by inspectors.

7) All leading hands for any trade should be educated up to Certificate 4 level.

This should be independently verified to cut out shonky training providers. Leading hands in all trades should be licensed and responsible for the work they do.

8) Enhance licensing of builders and subcontractors to ensure people in charge on site are educated beyond Certificate 4.

All people occupying construction roles with management responsibility should have valid qualifications in architecture, structural engineering or building.

9) Consider additional laws on contract provisions to reduce the economic power disparity between developers, head contractors and subcontractors.

Unfair commercial pressures are at the heart of much bad building. We should do more to cushion the smaller players from the larger ones.

10) And, while we are at it, we should ensure a value-capture process accompanies the development of tall residential buildings so the cost of upgrading social infrastructure is recovered.

High-density, high-rise buildings massively increase loads on socially owned infrastructure, such as schools, libraries, hospitals, parks and sporting facilities. The developers of tall buildings should be made to contribute adequately to the economic cost of enhancing these provisions, which can involve solutions that are unusually expensive, such as high-rise schools.

Read more: Explainer: what is ‘value capture’ and what does it mean for cities?

Authors: Geoff Hanmer, Adjunct Lecturer in Architecture, Univeristy of NSW, UNSW

Read more http://theconversation.com/beyond-opal-a-10-point-plan-to-fix-the-residential-building-industry-110975

Health & Wellness

Electric Sit-Stand Desks for Specific Professions: Tailoring to Your Needs

Hashtag.net.au - avatar Hashtag.net.au

Electric sit-stand desks, a modern solution to sedentary work habits, are adjustable desks that allow users to transition between sitting and standing positions with ease. The primary function of th...

Protein Shakers: A Convenient Solution for Meal Replacement on the Go

Hashtag.net.au - avatar Hashtag.net.au

In today's fast-paced world, maintaining a balanced diet can be challenging, especially when time is limited. This is where protein shakers come into play. These handy gadgets serve a simple yet ess...

Veneers for Young Smiles: Children's Dentist Insights

Hashtag.net.au - avatar Hashtag.net.au

Introduction Veneers are thin shells of porcelain or composite resin that are bonded to the front surface of teeth to improve their appearance. While veneers are often associated with adult cosmeti...

Dental Implants in Perth: The Ultimate Guide to a Beautiful Smile

Hashtag.net.au - avatar Hashtag.net.au

Introduction A beautiful smile can boost your confidence and enhance your overall appearance. However, missing teeth can detract from your smile and impact your self-esteem. Dental implants have em...

Tomorrow Business Growth